Total Odometer Screen

The total screen (landscape)
The total screen (portrait)

Contents

Description

The Total Odometer Screen displays the total odometer in very large digits. It's independent of the trip odometer.

Navigation

Units (top left)

The default unit of measurement is miles. If you double tap on the displayed units, it will toggle through miles, km, and nm (nautical miles). The odometer will be converted according to the selected units.

Title (top center)

The screen title, Total, displayed at the top so you can easily distinguish this screen from the very similar looking Trip Odometer Screen.

Reset Button (top right)

Reset Button Reset Button

A double tap on the Reset button, will set the Total Odometer to zero.

Total Odometer (middle center)

The Total Odometer contains the accumulated distance as reported by Location Services, since the last time the Reset button was double tapped.

Trip Timer (bottom left)

The trip timer shows the elapsed time since the last trip timer reset. The trip timer can be reset either by a double tap on the reset button on the Dashboard Screen or by a double tap on the reset button on the Timer Screen.

iOS Version Only: A double tap on the trip timer will toggle back and forth between the trip timer and the GPS accuracy.

Clock (bottom right)

At the bottom right of most screens (except the Clock Screen), is a digital clock with the current time that is MUCH bigger than the clock in the status bar.

The current time format is based on the 24-Hour Time setting (on = 24 hour, off = 12 hour), from the Settings App (Settings->General->Date & Time).