The Speed Screen contains the current, average and top speed, since it was last reset. The current speed comes from the GPS hardware. The average and top speeds were easy to calculate and so there was no reason NOT to include them in the App somewhere.
- Swipe Left (one finger, right-to-left), goes to the Location Screen
- Swipe Right (one finger, left-to-right), goes to the GPS Screen
- Triple Tap (one finger, 3 times), goes to the Menu Screen
Units (top left)
The default unit of measurement is MPH (miles-per-hour). If you double tap on the displayed units, it will toggle through the other units: MPH, KPH (kilometers-per-hour), and KNOTS (nautical miles-per-hour). The speeds will be converted according to the selected units.
Title (top center)
The screen title, Speed, displayed at the top so you can easily distinguish this screen from the other screens.
Reset Button (top right)
A double tap on the Reset button, will set the current, average and total speeds to zero.
Speed Stats (middle center)
There are 3 speed related items:
- Current Speed
- Average Speed
- Top Speed
The trip timer shows the elapsed time since the last trip timer reset. The trip timer can be reset either by a double tap on the reset button on the Dashboard Screen or by a double tap on the reset button on the Timer Screen.
NOTE: A double tap on the trip timer will toggle back and forth between the trip timer and the GPS accuracy.
At the bottom right of most screens (except the Clock Screen), is a digital clock with the current time that is MUCH bigger than the clock in the status bar.
The current time format is based on the 24-Hour Time setting (on = 24 hour, off = 12 hour), from the Settings App (Settings->General->Date & Time).